VERIFIED
The code on your display is 1d12, and in Maytag’s wall oven help it belongs with the 1d messages about the oven temperature sensor.
Reading 1d12
Three things are named: the temperature sensor inside the oven, the control that runs it, and the wiring linking them. Any of the three may be the problem, according to the entry.
How to reset
Go to the panel and cut power to the oven at its breaker(s), holding it off for one (1) minute. Restore the breaker(s). Over the following minute, check that 1d12 does not light up again. Last of all, verify oven operation.
Next step if the code returns
The entry directs owners onward to service when the reset has not cleared the message. That means a technician looking at the sensor, control and wiring.
Related Maytag codes
- 1d11: shares the sensor, control and wiring wording.
- 1d22: carries the same reset advice.
- 1c82: the control-only counterpart without the sensor.
Maytag oven repair, San Francisco
Arrange Maytag wall oven repair for a San Francisco or Bay Area kitchen by phoning (415) 649-2156. Tell the scheduler your model number, that the oven shows 1d12, and how the reset went.
Model compatibility: Maytag reuses codes across series and model years, so 1d12 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
