Maytag Dishwasher F1 E1 Error Code
F1 E1, also shown as 1 pause 1 pause repeating, points a Maytag dishwasher toward its control module; a 30-second power cycle comes first.
Model Reference
Maytag MDB4949SKZ Dishwasher Repair
A 24-inch front control dishwasher with a 50 dBA listing, checked for drainage, fill and door latch problems.
- 8appliance guides
- 50model pages
- 561error codes explained
- 150Bay Area places
- Mon–Sat8:00 AM – 7:00 PM
Model number
MDB4949SKZ
About this model
Model overview
Model details
The MDB4949SKZ is a dishwasher, 24 inches wide, described as having front control with a 50 dBA listing, and it is still sold new. The front control layout puts the buttons on the face of the door, where splashes and fingers reach them often. Read the overview of Maytag dishwashers for the family, and see Maytag dishwasher repair for how we work.
Typical complaints
- Standing water in the tub after the cycle ends.
- A cycle that never starts, or stops partway through.
- Dishes that stay gritty or cloudy.
- A door that seems closed but the machine does not respond.
Our posts on a {S(‘/maytag-dishwasher-not-draining/’,’dishwasher not draining’)} and a {S(‘/maytag-dishwasher-not-starting/’,’dishwasher not starting’)} explain how these are separated.
The drain connection under the sink
In a typical San Francisco kitchen the dishwasher drain hose runs up to a loop or air gap and then into the sink drain or a disposer. A hose that sags, a disposer knockout plug left in place after installation, or a clogged drain line can leave water sitting in the tub. If the dishwasher fills but never empties, the connection is a smarter first suspect than the pump itself.
Codes you may see
Dishwashers from this maker display F-and-E pairs. Dishwasher codes include F9E1 (not draining), F8E1 (no water or tap closed) and F5E1 (door not latched). Write down the exact code, since a technician reads it together with the symptom.
Owner checks
- Make sure the door latches fully and nothing on the rack blocks it.
- Check the water supply valve under the sink.
- Clean the filter at the bottom of the tub and clear the drain screen of food.
- Check the drain hose for kinks.
Leave the control panel and wiring alone. If you see smoke or smell burning, turn off the breaker.
Booking
The label is usually on the door frame or the tub edge. Read it as MDB4949SKZ. We provide a written estimate after diagnosis, and no repair starts without your approval. Compare with the MDB7959SKZ if your building also has a top control dishwasher. Mention anything unusual, such as a recent sink or disposer replacement, because that often explains a drainage complaint.
Frequently asked questions
A 24-inch dishwasher with front controls and a 50 dBA listing.
Not necessarily. Drain hose kinks, disposer plugs and clogged screens cause the same sight, so those are checked before the pump.
Usually along the door frame or the edge of the tub. Open the door and look at the sides.
Writing the code down and trying one power reset is fine. If it returns, stop and call us.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Dishwasher Repair in San Francisco
Drain, fill, heat, latch and control faults on Maytag dishwashers diagnosed in San Francisco and the Bay Area, with a written estimate…
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 649-2156
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California