VERIFIED
The reading F36 does not mean one single thing on every Maytag cooktop. What it stands for depends on whether the surface is induction or radiant element, and F37 only appears in the induction listing.
What each reading stands for
| Cooktop type | Code | Possible problem |
|---|---|---|
| Induction | F36, F37 | A temperature sensor on an induction coil |
| Radiant element | F36 | Communication between the touch control module and the electronic control |
Both listings are marked “may be”, so treat them as the area to look at rather than a confirmed failed part.
The power reset Maytag lists
- Go to the breaker(s) that feed the cooktop and switch them off. Keep them off for a full minute.
- Switch the breaker(s) on again.
- Stay near the cooktop for a minute and see whether F36 or F37 returns.
- Use the cooktop briefly to confirm everything works as it should.
The same four steps are given for both the induction and the radiant element versions of the code.
If the reading comes back
A code that returns after a clean reset means the sensor or the touch control link needs a technician. Opening the cooktop to chase either one is not an owner job.
Related cooktop codes
- F25 is cleared with the very same one-minute power reset.
- F40 names the touchpad, the power control board or the wiring.
- F4 appears when cookware sits too close to the control panel.
Cooktop repair in San Francisco and the Bay Area
Maytag induction and radiant cooktop service is available across San Francisco and the surrounding Bay Area through Maytag cooktop repair. Call (415) 649-2156 and say which type of surface you have, whether F36 or F37 was showing, and the model number from the cooktop. Mention that you already tried the one-minute breaker reset.
Model compatibility: Maytag reuses codes across series and model years, so F36, F37 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
