VERIFIED
The washer is not getting rid of its water
F9 E1 appears on front load and top load Maytag washers. The checks differ a little by layout, so find your type below.
Top load washers
The water level fails to change once the drain pump has started.
- Look at how far the drain hose reaches down the standpipe. If it passes the elbow it goes in too far, which allows siphoning and can bring slow spinning or none at all.
- Keep the hose in its original shape, and never tape it to the drain pipe.
- Take the kinks out of the hose and remove anything blocking the drainpipe or the utility sink.
Front load washers
A drain cycle that lasts beyond about 8 minutes triggers the code.
| Item | What Maytag says |
|---|---|
| Hose condition | Free of kinks and clogs, shaped with the U-shaped drain hose form. |
| Hose end | Reaches 4.5″ (113 mm) at most into the drainpipe or laundry tub; any deeper and drained water can siphon back. |
| Hose seal | No tape around the joint. Hold it secure but loose, leaving room for air. |
| Standpipe | 96″ at most, 39″ at least. |
| Drain pump filter | Some models: clean the filter found behind the bottom dispenser drawer. |
| Door seal (bellow) | Small drain holes inside the seal can clog and need cleaning. |
| Detergent | HE only, since extra suds slow draining. |
Related drain codes
- drn is the display form that goes with F9 E1.
- F21 reports a drain problem.
- F0 E2 reports excessive suds in the basket.
Drain repair in San Francisco
If F9 E1 returns once you have gone through the checks, a technician visit is the next step. Call (415) 649-2156 for Maytag washer repair in San Francisco and the Bay Area. Tell us the model number, front load or top load, and what you already tried.
Model compatibility: Maytag reuses codes across series and model years, so F9 E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
