Skip to content
Model Reference

Maytag MFW7020RF Washer Repair

A current 27-inch Smart Pet Pro front load washer, checked for leaks, drain and spin trouble.

Model number MFW7020RF
About this model

Model overview

About the MFW7020RF

The MFW7020RF is a front load washer, 27 inches wide, listed in the Smart Pet Pro 5.0 cu ft series with a 2024 year, and it is still sold new. Pet households put particular strain on a washer, because hair collects in filters and drains. Beyond that, the general advice on Maytag washers and Maytag washer repair applies.

Where pet hair causes trouble

Hair works into the drain filter, wraps around the door gasket folds and collects in the soap drawer area. When it builds up, the washer can drain slowly, hold odors or leave residue on clothes. A technician checks these places first. You can wipe the gasket and rinse the drawer, and look at the drain filter if it is reachable.

Complaints

  • Slow drain, with the washer stopping and showing F9 E1.
  • A door lock fault such as F5 E2.
  • Loud spin and moving across the floor.
  • Water at the front after a cycle.

Our general guides cover a washer not draining and a washer not spinning.

Water supply and drainage at home

Garage laundry in the avenues and closet laundry in flats both place the washer near a standpipe. Make sure the drain hose is seated with a loop, not pressed down hard, and the supply hoses are straight. A hot-and-cold reversal shows up as odd water temperatures or a water fault code; check the hose labels.

Owner checks

  1. Check power and breaker.
  2. Open the water valves.
  3. Pull hair from the gasket folds.
  4. Level the washer and move it away from the wall.

Arranging service

The model number sits on the door rim or inside the door opening: MFW7020RF. A written estimate follows diagnosis, and we start nothing without your approval. For an older Neptune in a nearby unit, see the MAH6700AWW. Households with pets or long-haired family members should mention it, since it changes where we look first. Also say whether the washer is on a wood floor or a slab, because a flexing floor makes spin vibration worse and can be confused with a machine fault. If the washer sits in a stacked closet, tell us how much clearance there is in front, so the visit is planned with room to work.

Frequently asked questions

Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.

Diagnostics

Error codes for this appliance

Fix it right

Repair service

Models

Other models

Ready to get your Maytag appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 649-2156 Book a Repair