Maytag Wall Oven 1c1c Error Code
1c1c on a Maytag wall oven flags the keypad or user interface, or its wiring; a one-minute breaker reset is the first step.
A 30-inch double oven with true convection, tested cavity by cavity.
The MEW9630FZ is the 30-inch double in Maytag’s wall oven lineup, listed at 10.0 cu ft with true convection, and still sold new. It is a hard-working appliance in a family kitchen, particularly around holidays when both cavities run together. Our Maytag wall oven repair page and the Maytag wall ovens guide give the wider background.
The calls we take on a double oven are rarely about a total failure. More often one cavity runs cooler than it says, the upper oven preheats but does not hold temperature, a convection fan makes a new noise, the door lock stays engaged, or a connected-appliance Wi-Fi code appears and will not clear. Because both ovens use the same control, a clean diagnosis separates a control problem from a cavity problem.
Several codes apply here. F1 points to an oven temperature sensor or control, F6 E6 refers to the upper oven appliance manager control, and F6 E9 refers to the lower one. FC E1 is a connected-appliance Wi-Fi problem, so a router change can matter. Write down the exact sequence.
A double oven is heavy, and it is usually fitted in a tall cabinet column. In Bay Area homes that have been remodeled, the column sometimes has little clearance at the sides and rear, and the cooling air path can be partly blocked. We check that path early, as heat that cannot leave a cavity can mimic a failed part.
Never open the cabinet or bypass a latch. Burning smell or sparks means breaker off.
The MEW9627FZ is the 27-inch double, while singles are the MEW9527FZ and MEW9530FZ. We take the number straight from the label; how to find your Maytag model number shows the usual places. For heat trouble, see our post on an oven not heating.
We test, explain, and put the estimate in writing. You approve before we start.
It is the oven capacity and convection type. For repair, what matters is that the two ovens share one control but have their own heating and sensing parts.
That code refers to a Wi-Fi connection problem, not heating. Checking your router is the first step.
Yes, if that is where the fault is. We test each cavity separately and tell you which one needs work.
Yes. Clear airflow around the cabinet helps the cooling fan, and blocked vents can trigger codes.
Yes, it is still sold new.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.