Maytag Microwave D1:0 Error Code
D1:0 and D1:1 are setting readouts on a Maytag countertop microwave, showing whether the 2-step door is enabled.
An over-the-range 1.7 cu ft microwave that also moves air above the stove.
The MMV1175JZ is an over-the-range microwave listed at 1.7 cu ft and still sold new. Because it sits above the cooking surface, it does two jobs: heating food and clearing steam and smoke. That second job is why grease and a stuck fan show up in so many repair calls. Start with Maytag microwave repair and see Maytag microwaves for the others in the lineup.
Owners usually describe a microwave that runs but does not heat, a turntable that does not turn, a light that is out, a fan that is slow or noisy, a keypad that ignores touches, or a door that will not latch. Heating trouble has its own post: see why a microwave is not heating.
E03 means the keypad reported a problem to the control board. F2H1 points to the vent fan and light switch on the lower left front. E21 says the thermal sensor circuit reported open. Write the code down before you reset anything.
An over-the-range unit hangs from a bracket and a top cabinet, with a power cord into an outlet in the cabinet above and either an outside duct or a recirculating vent. Tall tenants, narrow galley kitchens and shallow upper cabinets are common here, and a unit that has been shaking on a loose mount may fail sooner. We check how it is mounted, whether the ducting is open, and whether the grease filters are clean.
Never open the cabinet or the case, since a microwave stores charge even when off.
The MMV4207JZ and MMV6190FZ are the other over-the-range models, each with different listings. Give us the complete number from the door frame; how to find your Maytag model number shows the usual spot.
We diagnose before any repair, write the estimate down, and wait for your approval. If the mount, duct or filters are the real cause, we tell you that instead of replacing parts.
It is an over-the-range microwave at 1.7 cu ft.
Keeping the grease filters clean helps. A fan that is slow or noisy may have a switch or motor problem a technician should check.
The keypad reported a problem to the control board, which points to the touch panel or its connection.
No. Parts inside can hold a dangerous charge even when unplugged, so leave the case closed.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.